IP Video System'sV₂D XP 100 is a single channel utlra HD encoder/decoder in a small form factor package designed to facilitate the video streaming and remote deskop sharing collaboration requirements in space-challenged environments.

• Single Channel hardware encoder or decoder
• Ultra HD 4-megapixel resolution support
• Full dual DVI I/O for Local Monitor Loopback
• Remote Desktop Video Overlay on Local monitor
• Remote Desktop Applicaiton Control with local USB Keyboard/Mouse
• Supports and integrates easliy in Ver 3.x Management Server architecture
• Fast software switching between encoder/decoder function.

IP Video Systems' V₂D XP 100 is a single channel Ultra HD encoder (Tx) or decoder (Rx) in a small form factor design (6.25" W x 1.75" H x 9.5" D), delivering real-time streaming of above 4 mega-pixel resolution graphics/video with high frame rates and low latency over IP networks .

The V₂D XP 100 product incorporates state-of-the-art encoding and decoding technologies optimized for net-centric simulation and high-end visualization applications, integrating video, audio and control data on a robust and easy-to-use platform.

The XP 100, with Ultra HD high resolution video, graphics and audio extender, allows configured locations to view and control the graphics and video in real time. Multiple remote locations can simultaneously view and control the source application using only a display, keyboard, and mouse. In addition the XP 100 Rx supports video windowing and overlay to allow viewing of full screen native or scaled down picture-in-picture (PIP) view of the remote video window on top of local data. Applications include networked simulation, graphics application sharing, and remote surgical intervention.

The V₂D XP100 promotes unparalleled video streaming and collaboration capabilities with real-time video and graphics, audio, and remote keyboard/mouse control, creating a completely interactive ex- perience among users on a global basis. The systems can be connected to Ethernet local area networks, campus and metro networks as well as wide area IP networks, supporting networked simulation, distributed visualization, telepresence, and remote TeleCollaboration(TM) over any distance.

The V₂D XP 100 offers unparalleled video streaming and collaboration capabilities, with real-time video and graphics, audio and remote keyboard/mouse control creating a completely interactive experience among users on a global basis.

V2D XP 100 Ultra HD Encoder/Decoder (Backpanel)

The low-noise, lightweight V₂D XP 100 with 1 dual link DVI-I channel supports Tx (encoding) or Rx (decoding) functionality in a set top box form factor. Dimensions: 6.25" x 9.5" x 1.75" (W x D x H). Weight ~3.6 lbs. (Preliminary)

The figure below shows IP Video Sytems TeleCollaboration setup using XP 100s in a real-time desktop/video sharing and remote desktop application control over IP networks. The remote locations is receiving the XP100 transmitted image in real-time (from the remote location on the left) and is shown (on the right) with local monitor loop back and remote imge overlay (PIP).

Small Form Factor design for small space requirements
IP Video Systems' V₂D XP 100 was designed to meet the needs of hi-res video/graphics collaboration applications with limited space.
The XP 100 Small Form Factor chasis 1.75" x 6.25" x 9.5" (H X W X D) offers a smal foortprint but without sacrificing any of the 4-megapixel resolution (2560 x 1600, 3840 x 1200) supported by the other XP family of encoder/decoder products.

• 3840 x 1200, 2560 x 1600, 1920 x 1200, 1920 x 1080, 1800 x 1440,
  1600 x 1200, 1280 x 720, 1280 x 1024, 1024 x 768, 800 x 600
  
  

Horizontal frequency Up to 110kHz

Maximum clock rate 308 MHz

Input/output signal TMDS (DVI-I), RGBHV

Connector type 1 Dual-link DVI-I input , 1 Dual-link DVI-I output

Compression type Advanced visualization with intelligent frame differencing and configurable, progressive spatial compression

Window overlay Remote video window overlay with Picture-in-Picture (PIP) window over local video/PC display.
Script based overlay control commands for instant overlay video on/off, size and position

Audio Line in/out (3.5 mm stereo jack) with local and remote audio mixing

Serial Port RS-232 via USB port adapter

SD/MMC Memory Card Slot For storing configuration data

Keyboard/Mouse 4 USB connectors

Network Interface

• Interface type 10/100/1000BaseT with switching
• Connector type Two RJ45

Ethernet Protocol

• Traffic type Variable bit-rate with configurable maximum and burst rate settings
• Frame rate Configurable fixed frame rate settings
• IP Protocols IP Parameters manual or automatic configuration via DHCP. Multicast via IGMP with multicast routers
• QoS Mechanism coping with packet loss and network latency/jitter. Configurable update rate optimization

Management

• Interfaces Telnet, SSL, TFTP, SFTP, SSH
• Commands MS web-based management and menu-based system, CLI/API
• Configuration data Stored on removable SD/MMC card or Onboard SSD

Certification and Compliances

• Safety UL/CSA/EN/IEC 60950-1 CB report
• EMC CE ,FCC Part 15 Class A, CISPR 22, ICES-003

General

• Power External 12 VDC adapter, 40 W max.
• Form factor Two units in 1U rack-mount or desktop
• Dimensions 1.75" x 6.25" x 9.5" (H x W x D)
• Weight ~ 3 .6 Lbs ( 1.6 Kg) (Preliminary)
  
  (Preliminary Specifications - Subject to Change)